HyGrade

Specifications
MODEL		1200	1400	1600
Blade	Blade Length	12'	14'	16'
	Blade Angle	45°	45°	45°
	Blade Height	30”	30”	30”
	Blade Tilt	15°	15°	15°
	Blade to Ground Clearance	21”	21”	21”
Tires		Two Quad Rib 11.00 x16, 8 ply	Two Quad Rib 11.00 x16, 8 ply	Two Quad Rib 11.00 x16, 8 ply
Hubs and Spindles		6000# 8 bolt	6000# 8 bolt	6000# 8 bolt
Total Weight		5400#	5550#	5750#
Tongue Weight		1180#	1230#	1300#
Transport Width	Pinned	9’7”	11’4”	12’3”
	Unpinned	8’5”	9’8”	11’1”
Overall Length		19’8”	19’8”	19’8”
HP Range		90– 230	120 – 400	120 – 400
Weight Box		58” x 28” x 12”	58 ”x 28” x 12”	58” x 28” x 12”

The Models 1200RS,1400RS, and 1600RS have Hydraulic Rear Steer that allows the operator to move the blade 4 to 5 feet more to the left or the right side of the tractor hydraulically from the tractor seat.
All Rear Steer models require 4 hydraulic remotes.

The Rear Steer feature allows the HyGrade grader to clean along feedlot fences, bunk lines, buildings, road edges, trees, etc. without having to drive the tractor so close to the objects that you are working near.

The Rear Steer feature gives the Grader the capability to clean out irrigation and drainage ditches that are wet, while keeping the tractor on drier ground.

The Rear Steer Models make road construction and riprapping easier since the operator doesn't need to drive as close to the edge of the road banks.

THE HYGRADE GRADERS ARE BUILT RUGGED TO DO
THE TOUGH JOBS THAT YOU NEED THEM TO DO.

Models 1200RS, 1400RS, and 1600RS
Rear Steer HyGrade Graders

Specifications
MODEL		1200RS	1400RS	1600RS
Blade	Blade Length	12'	14'	16'
	Blade Angle	45°	45°	45°
	Blade Height	30”	30”	30”
	Blade Tilt	15°	15°	15°
	Blade to Ground Clearance	26”	26”	26”
Tires		Two Quad Rib 11.00 x16, 8 ply	Two Quad Rib 11.00 x16, 8 ply	Two Quad Rib 11.00 x16, 8 ply
Hubs and Spindles		6000# 8 bolt	6000# 8 bolt	6000# 8 bolt
Total Weight		5760#	5910#	6110#
Tongue Weight		1330#	1380#	1440#
Transport Width	Pinned	9’1”	10’8”	11’2”
	Unpinned	8’0”	9’0”	10’0”
Overall Length		21’5”	21’5”	21’5”
Horse Power Range		90– 230	120– 400	120 – 400
Weight Box		46½”x34”x12”	46½”x34”x12”	46½”x34”x12”

ALL REAR STEER MODELS REQUIRE
4 HYDRAULIC REMOTES.

Model 1600RS shown with cement weight.

Eight Models To Choose From:
	* 800	* 1000
	* 1200	* 1200 RS
	* 1400	* 1400 RS
	* 1600	* 1600 RS

The HyGrade design with the farmer in mind Models 1200, 1200RS, 1400, 1400RS, 1600, 1600RS
	All hydraulic cylinders, hoses and tips are included.
	Dual hydraulic cylinders for blade angle are standard on each model.
	All hydraulic cylinders have nitro steel shafts.
	Blade angle hydraulic relief valve standard on each model.
	Available in 12’, 14’, and 16' blade lengths.
	Blade angles 45 degrees left and right.
	Blade tilts 15 degrees left and right for slope cuts.
	Cement weight, weight box and box scraper ends are standard with each model.
	Replaceable high carbon steel cutting edge.
	High moldboards allow for maximum dirt transfer.
	Excellent blade to ground clearance.
	Storable hitch jack.
	Safety chain is included.

	Click here to download specification sheet in Adobe Acrobat format
	Note: Download may take a few minutes depending on your connection speed.
See our Video page
Contact Information
Back to top

==================================================================================== WHETHER THE JOB IS BIG OR SMALL, THERE'S A HYGRADE GRADER TO DO IT ALL! ====================================================================================
	HyGrade Pull Type Graders HyGrade Graders are a quick and economical way to clean and maintain waterways, rebuild ponds, build roads, dig irrigation ditches, fill in washouts, level building sites, clean feedlots, grade roads, remove snow, level field edges, build and maintain terraces and many other jobs with your farm tractor.